WBT Industrial > Products > Wire Mesh Belts > SC Belt
SC Belt
Compact mesh balanced belt made by alternating spirals twisting to the left and to the right, interconnected by straight bars (crossbars).
The wire of the spiral can be round or laminated in order to obtain a flat surface.
It is a compact mesh belt with a minimum quantity of air passing through, and it is suitable to convey even small parts.
It is used in cold and humid working environments and at high temperatures depending on the type of material of which it is made.
The belt is moved by interference with the drive roller.
It is linear and stable during operation mode and has a good tensile strength.
It can be equipped with side chains. See SCC Belt.
Technical Data
Width: from 35 to 6000 mm
Mesh Pitch: from 1,4X3,5 mm to 10×64 mm
Round Spiral Wire: from Ø 0,7 mm to Ø 4 mm
Flat Spiral Wire: from 1,2×0,7 mm to 3×2 mm
Ø Crossbar Wire: from 1 to 5 mm
Materials
Carbon Steel
Galvanized Carbon Steel
Copper-plated Mild Carbon Steel
C 20
C 40
AISI 304
AISI 304 L
AISI 310
AISI 314
AISI 316
AISI 316 L
AISI 316 Ti
AISI 321
AISI 330 Nb
AISI 430
Aluminum
Brass
Copper
NiCr 80/20
Inconel 600
Inconel 601
Applications
This belt can be made in a wide variety of meshes and with different wire diameters, which make it suitable to satisfy the needs in different applications in continuous tunnel furnaces both in the food and metallurgical sector in environments with temperatures up to 1150°C.
Architecture
Oven food cooking
Dehydration
Desiccation
Bakery tunnel ovens
Leather processing
Metal heat treatment lines
Metal heat treatment
Cooling
Bread toasting
Surface treatment
Food grilling
Accessories
Side plates
Drivers / Lifters
Infill elements
Available Edges
Welded edges
Bent edges
Looped edges
Welded edges with side plates
AREAS OF APPLICATION
Food Industry
Vegetables and Fruits
Pharma Industry
Heat Treatment
Other Applications