WBT Industrial > Products > Wire Mesh Belts > SCC Conveyor Belt

SCC2 wire mesh belt nastro trasportatore

SCC Conveyor Belt

Compact mesh balanced spiral Conveyor belt made by alternating spirals twisting to the left and to the right, interconnected by straight bars (crossbars) that are connected to the side chains.

The SCC Conveyor belt is the SC belt equipped with side chains. Therefore, like the SC, it is a balanced spiral belt made by alternating spirals twisting to the left and to the right, interconnected by straight bars (crossbars) that are connected to the side chains.
The wire of the spiral can be round or laminated in order to obtain a flat surface, while the wire of the crossbar is round.
If necessary, the SCC belt can be equipped with movable side edges, self-supporting frames and lifters as well as infill elements inserted in the spirals. It is linear and stable during operation mode and has an excellent strength-to-weight ratio.

Technical Data

Width: from 100 to 4000 mm
Mesh Pitch: from 1,4X3,5 mm to 10×64 mm
Round Spiral Wire: from Ø 0,7 mm to Ø 4 mm
Flat Spiral Wire: from 1,2×0,7 mm to 3×2 mm
Ø Crossbar Wire: from 1 to 13 mm
Chain Pitch: from 1/2" (12,7 mm) to 4" (101,6 mm)
Available edges: Welded edges, bent edges, looped edges, welded edges with side plates

Materials

Carbon Steel
Galvanized Carbon Steel
Copper-plated Mild Carbon Steel
C 20
C 40
AISI 304
AISI 304 L
AISI 316
AISI 316 L
AISI 430

Applications

This belt can be made in a wide variety of meshes, with different wire diameters and types of materials. It is suitable to convey both fair-sized and small parts, allowing a decent air flow. It is suitable to be used in cold and medium-hot environments.
It is mainly used in the food sector and in the metallurgical sector.

Oven food cooking
Bakery tunnel ovens
Bread toasting
Freezing
Frying
Cooling